Get Info

Fill out the form below to request more information about: D-Tech _Winchline_with_HMWPE_jacket_lifting

The form was successfully submitted.
Required field.
Invalid email
Field with maximum character limit
There was an error submitting the form, please try again!

* Required fields

Submit
D-Tech Winchline with HMWPE jacket

D-Tech Winchline with HMWPE jacket

Made from HMWPE fibres and coated with a PRO-TECH self-unique impregnation that improves its abrasion resistance and fatigue properties, Cotesi D-Tech Winchline must be considered when high breaking strengths are required. Stronger than steel wire ropes of same weight, has proven to be a cost-saving replacement in several applications. Double braided construction to higher breaking loads, with a 12 strands HMWPE core and a 32 braids cover in HMWPE.

Also available with PE jacket.
  • Advantages
    • 1/7 of the steel wire weight
    • Longer life time compared to steel wire
    • Low operational costs 
    • Low elongation
    • Non kinking and non-rotating
  • Applications
    • Mooring lines 
    • Anchor line
    • Winch lines
    • Towing and Tug ropes
  • Tecnhical Informations
    • Raw material: HMWPE 
    • Specific Gravity: 0,98 (floating)
    • Melting Point: 150C / 265C
    • Elongation at % of BS:
    25% . 0,9%
    50% . 1,6%

    Diameter Size
    Circ.
    Weight Breaking Load
    mm inches inches ktex Kg/100m lbs/100ft kgf lbf kN
    16 5/8 5 1/2 138 13,8 9,3 14.990 33.046 147
    18 3/4 6 190 19 12,8 20.394 44.961 200
    20 13/16 3 230 23 15,5 26.513 58.450 260
    22 7/8 3 1/4 274 27,4 18,4 31.611 69.690 310
    24 1 3 360 36 24,2 38.749 85.426 380
    30 1 1/4 3 3/4 425 42,5 28,6 45.887 101.163 450
    32 1 1/3 4 474 47,4 31,9 53.025 116.899 520
    34 1 11/32 4 1/4 544 54,4 36,6 61.183 134.884 600
    36 1 1/2 4 1/2 637 63,7 42,8 69.341 152.868 680
    38 1 4/7 4 3/4 706 70,6 47,4 78.518 173.101 770
    40 1 5/8 5 765 76,5 51,4 88.716 195.581 870
    42 1 5/7 5 1/4 874 87,4 58,7 97.893 215.814 960
    44 1 3/4 5 1/2 963 96,3 64,7 106.051 233.798 1040
    46 1 3/4 5 1/2 1020 102 68,5 118.288 260.775 1160
    48 2 6 1100 110 73,9 128.485 283.256 1260
    52 2 1/8 6 1/4 1380 138 92,7 148.879 328.217 1460
    54 2 1/8 6 1/2 1500 150 100,8 161.116 355.193 1580
    56 2 1/4 7 1575 157,5 105,8 173.352 382.170 1700
    60 2 1/2 7 1/2 1650 165 110,9 200.885 442.868 1970
    *Other diameters available upon request.

    The technical characteristics stated are the result of a Cotesi development and are strictly indicative.
    We reserve the right to change them without prior notice. Tolerance in weights: 5%.
    Breaking load values stated shall be reduced by 10 % in the case of a rope with eye-spliced terminations. Produced and tested in accordance to the latest ISO standards.